LED Colours?

[stuzog]

What do the Blue, Green and Red LEDs signify, either one-time, constantly on, or flashing? I can't find a listing in the documentation.

[admin]

Great question-- I think I mentioned them in various parts of the User Manual but I should probably have a chart that lists them all. I believe this is most of them:

Green:

- Blinks once when powering on
- Blinks once when connecting to or disconnecting from the Config Tool
- Blinks once when simple commands are received from the Config Tool or simple controls are changed with button behaviors
- Blinks three times when saving settings, applying the currents settings to all three instruments, or restoring factory settings
- When certain settings are changed, it flashes multiple times to indicate the "number" of the new setting. These include: Instrument, vibrato/slide mode, register control mode, and octave shift up and down.
- Stays on for 10 seconds when calibrating sensors (5 seconds when calibrating the bell sensor alone)

Blue:

- Blinks quickly when in programming (UF2) mode
- Blinks twice when connecting by BLE
- May blink once when opening or closing a BLE app on certain systems

Red:

- Pulses slowly when charging
- May blink approximately once per second if there is a battery error while attempting to charge (temperature too high/low, battery missing, etc.)
- Lights for 1/2 second when powering down by a button command
- Lights for 5 seconds before shutting down because of low battery level

Teal:

- Flashes to indicate the battery level when that option is triggered by a button action

[stuzog]

Wow! That's many more than I imagined! Thanks! This should definitely make its way into my Documentation, along with the changes for the new Update -- if I can remember how I did that!

[admin]

There is now a section near the end of the User Manual that contains this list (mostly verbatim).