Thumb Register Isn't Working

Feel free to post any broad WARBL questions or comments here.
Post Reply
jokoloski
Posts: 6
Joined: Fri Jun 19, 2020 1:28 am

Thumb Register Isn't Working

Post by jokoloski » Fri Jun 19, 2020 1:35 am

Hi, I'm having an issue where after I select the "Thumb Register" radio button in the "Note Trigger and Register Control" section I can only play the notes on the upper octave but covering the thumb hole doesn't let me play the notes on the lower octave (it still plays the upper octave). Do you know why this might be happening?

User avatar
admin
Site Admin
Posts: 302
Joined: Tue Mar 26, 2019 5:17 pm
Contact:

Re: Thumb Register Isn't Working

Post by admin » Fri Jun 19, 2020 1:46 am

Hi, which fingering chart are you using? That affects how the thumb register setting behaves.
Andrew Mowry
info@warbl.xyz

jokoloski
Posts: 6
Joined: Fri Jun 19, 2020 1:28 am

Re: Thumb Register Isn't Working

Post by jokoloski » Fri Jun 19, 2020 1:55 am

Tin whistle/Flute

User avatar
admin
Site Admin
Posts: 302
Joined: Tue Mar 26, 2019 5:17 pm
Contact:

Re: Thumb Register Isn't Working

Post by admin » Fri Jun 19, 2020 2:18 am

Are you using v. 1.8 of the firmware? I just tested it here and it seems to be working, but there might be something with your settings.

Does the "light" for your thumb down in the calibration panel turn blue when you cover that hole, as you would expect?

If you could attach a screenshot of your settings, that might help me too.

Thanks!
Andrew Mowry
info@warbl.xyz

jokoloski
Posts: 6
Joined: Fri Jun 19, 2020 1:28 am

Re: Thumb Register Isn't Working

Post by jokoloski » Fri Jun 19, 2020 2:53 am

Thanks so much for your help! The issue was that I hadn't calibrated the thumb sensor when I auto-calibrated upon first getting the WARBL.
It is working properly now!

User avatar
admin
Site Admin
Posts: 302
Joined: Tue Mar 26, 2019 5:17 pm
Contact:

Re: Thumb Register Isn't Working

Post by admin » Fri Jun 19, 2020 2:54 am

Okay, great! I’m glad it’s working.
Andrew Mowry
info@warbl.xyz

Post Reply