Bag pressure too sensitive

Feel free to post any broad WARBL questions or comments here.
Post Reply
jokoloski
Posts: 6
Joined: Fri Jun 19, 2020 1:28 am

Bag pressure too sensitive

Post by jokoloski » Mon Jun 29, 2020 3:45 pm

Hello,
I'm trying to use the WARBL with the collapsible water bottle bag. I inflate the bottle by blowing air in, plug the stopper into the bottle to trap the air, and then plug the other end of the stopper into the WARBL. I'm finding it almost unusable because when I have the bottle lodged between my arms the slightest pressure triggers a note and once a note is triggered it is basically impossible to stop the note unless I "unsqueeze" the bottle with my hand. I've tinkered with the configuration settings by inserting a high value like 3 or 4 for the "inH20", but I still experience the same issues. Do you have any recommended workarounds?
Thanks!

User avatar
admin
Site Admin
Posts: 302
Joined: Tue Mar 26, 2019 5:17 pm
Contact:

Re: Bag pressure too sensitive

Post by admin » Mon Jun 29, 2020 4:06 pm

Hi, when you enter the value of 3 or 4 in the “inH2O” field, you also need to select “Learn or enter pressure”. That will cause WARBL to use the pressure that you entered. Otherwise it will still be calibrating at startup, so it will be using a pressure near zero, and squeezing the bag even slightly will cause it to play.
Andrew Mowry
info@warbl.xyz

Post Reply