Help
-
- Posts: 1
- Joined: Wed Jan 05, 2022 4:15 pm
Help
So new, I just play whistle for fun, Mrs bought me the warble, just want to play tin whistle, I get connected and it says its tin whistle notes that I'm playing but it's defo not?? Or nothing like my normal tin whistles???
Re: Help
Here’s the WARBL tin whistle fingering chart, which should be very similar to a real whistle:
https://warbl.xyz/WARBL%20Fingering%20Charts.pdf
I wonder if the sensors may need calibration, which might make it seem like fingering chart is off. If the sensors are calibrated correctly for your fingers, the tone holes on the diagram of the WARBL in the Configuration To should turn blue when you just barely touch the tone holes. This video should help with sensor calibration, if necessary.
https://youtu.be/R7Xl5Db8QDM
If you could attach a screenshot of your settings in the Configuration Tool, that might also help me figure out what’s going on.
Thanks!
https://warbl.xyz/WARBL%20Fingering%20Charts.pdf
I wonder if the sensors may need calibration, which might make it seem like fingering chart is off. If the sensors are calibrated correctly for your fingers, the tone holes on the diagram of the WARBL in the Configuration To should turn blue when you just barely touch the tone holes. This video should help with sensor calibration, if necessary.
https://youtu.be/R7Xl5Db8QDM
If you could attach a screenshot of your settings in the Configuration Tool, that might also help me figure out what’s going on.
Thanks!
Andrew Mowry
info@warbl.xyz
info@warbl.xyz