Transient note filter not saving
Re: Transient note filter not saving
Oh, sorry, navigate to the Configuration Tool (and click "connect" if necessary).
Andrew Mowry
info@warbl.xyz
info@warbl.xyz
Re: Transient note filter not saving
Cant find the Config tool:
---------------------------
Gonzo Projects Page: https://gonzos.net/projects
Gonzo Projects Page: https://gonzos.net/projects
Re: Transient note filter not saving
Sorry, I wasn't clear:
-Go to the normal Configuration Tool page:
https://warbl.xyz/configure.html
-Open the Developer Tools (as you have done), and click "console"
-Plug in the WARBL if it's not plugged, and click "Connect" in the Configuration Tool
There should be some messages displayed in the Console.
-Go to the normal Configuration Tool page:
https://warbl.xyz/configure.html
-Open the Developer Tools (as you have done), and click "console"
-Plug in the WARBL if it's not plugged, and click "Connect" in the Configuration Tool
There should be some messages displayed in the Console.
Andrew Mowry
info@warbl.xyz
info@warbl.xyz
Re: Transient note filter not saving
OK.
Here 'tis
Here 'tis
---------------------------
Gonzo Projects Page: https://gonzos.net/projects
Gonzo Projects Page: https://gonzos.net/projects
Re: Transient note filter not saving
Thanks! Interesting-- it found an output port with same name as the port that it received a message from, so it thinks that that is the WARBL.
I'm not sure what that MIDI Through port is-- do you have any other MIDI apps open, or any other MIDI hardware connected?
I'm not sure what that MIDI Through port is-- do you have any other MIDI apps open, or any other MIDI hardware connected?
Andrew Mowry
info@warbl.xyz
info@warbl.xyz
Re: Transient note filter not saving
Could you try connecting again now, after force-reloading the page (Crtl-F5)?
I added another fix to look only for a port that has sent a WARBL-specific CC message.
I added another fix to look only for a port that has sent a WARBL-specific CC message.
Andrew Mowry
info@warbl.xyz
info@warbl.xyz
Re: Transient note filter not saving
I did a refresh without the Warbl connected, then plugged in, and "connect"
The messages above the error message were from the refresh
The messages above the error message were from the refresh
---------------------------
Gonzo Projects Page: https://gonzos.net/projects
Gonzo Projects Page: https://gonzos.net/projects
Re: Transient note filter not saving
Great! Does it seem to be working correctly now (sending commands to the WARBL)?
Andrew Mowry
info@warbl.xyz
info@warbl.xyz
Re: Transient note filter not saving
Yes!!
Tested:
TNF adjustment - LED flashes
Save instrument - LED flashes and config is saved
Export - file exports immediately.
I think it's fixed!
Thanks
Gonzo
Tested:
TNF adjustment - LED flashes
Save instrument - LED flashes and config is saved
Export - file exports immediately.
I think it's fixed!
Thanks
Gonzo
---------------------------
Gonzo Projects Page: https://gonzos.net/projects
Gonzo Projects Page: https://gonzos.net/projects
Re: Transient note filter not saving
Pfew, great!
The problem was that that MIDI Through port was bouncing messages back to the Configuration Tool, which thought it was the WARBL sending a response back. After that the Config Tool was targeting only the MIDI Through port. Maybe that port is just always open on Linux?
Now the Config Tool only looks for a port that sends back a specific message (CC110 on channel 7, which is the first message that the WARBL sends back). That should avoid inadvertently connecting to any MIDI ports or devices that have MIDI thru turned on. It should make it a bit more robust on all platforms (hopefully).
Thanks for your help! Just let me know if it gives you any more trouble.
The problem was that that MIDI Through port was bouncing messages back to the Configuration Tool, which thought it was the WARBL sending a response back. After that the Config Tool was targeting only the MIDI Through port. Maybe that port is just always open on Linux?
Now the Config Tool only looks for a port that sends back a specific message (CC110 on channel 7, which is the first message that the WARBL sends back). That should avoid inadvertently connecting to any MIDI ports or devices that have MIDI thru turned on. It should make it a bit more robust on all platforms (hopefully).
Thanks for your help! Just let me know if it gives you any more trouble.
Andrew Mowry
info@warbl.xyz
info@warbl.xyz